EASTERN MOLDING INTERNATIONAL
A DIV. OF HSDI CORPORATION
PRODUCTS -> HIGHWAY TECH DRUMS
- All models meet Federal MUTCD
- Certified to meet the crashworthy requirements of NCHRP 350
- Available in High Density or Low Density Polyethylene
- U.V. Stabilizer additive for protection against color fading
- 3 available base options:
1. Tire Ring
2. 25LB. or 40LB. Recycled Molded Rubber Base
3. Plastic Sandbag Bas
- Designed to inhibit roll after impact
- Handle accepts one or two type A or type C Lights designed
to be attached with standard size bolt and bolt protector
- Rounded top to inhibit the build up of any dangerous materials
- Available with 4 inch and 6 inch bands of your choice of 3M
Retroreflective Sheeting
- Easy Stacking
- Drum designed to break free from all bases upon impact
HIGH DENSITY DRUMS |
LOW DENSITY DRUMS |
||
MODEL |
DESCRIPTION |
MODEL |
DESCRIPTION |
| HD-4-4EG | High Density Drum 4 – 4” Engineer Grade Stripes |
LD-4-4EG | Low Density Drum 4 – 4” Engineer Grade Stripes |
| HD-4-4HI | High Density Drum 4 – 4” High Intensity Grade Stripes |
LD-4-4HI | Low Density Drum 4 – 4” High Intensity Grade Stripes |
| HD-4-4DG | High Density Drum 4 – 4” Diamond Grade Stripes |
LD-4-4DG | Low Density Drum 4 – 4” Diamond Grade Stripes |
| HD-4-6EG | High Density Drum 4 – 6” Engineer Grade Stripes |
LD-4-6EG | Low Density Drum 4 – 6” Engineer Grade Stripes |
HD-4-6HI |
High Density Drum 4 – 6” High Intensity Grade Stripes |
LD-4-6HI | Low Density Drum 4 – 6” High Intensity Grade Stripes |
HD-4-6DG |
High Density Drum 4 – 6” Diamond Grade Stripes |
LD-4-6DG | Low Density Drum 4 – 6” Diamond Grade Stripes |
HD-PLAIN |
High Density Drum – No Sheeting |
LD-PLAIN | Low Density Drum – No Sheeting |
Highway Tech Drum Specifications |
|||
| Mass (withoutballast) | H.D.P.E. 7.5 lbs. |
Height | 41.27” |
| Diameter | Minimum: 18.12” |
Handle Thickness | 1” overall 1/2 ” at point where lights are attached |
| Color | Traffic Barrel Orange |
All bases are designed with anti-rotational feature |
|
Highway Tech Bases |
|||
MODEL |
DESCRIPTION |
||
| HTR-22.5 | 22.5 “ Nominal Tire Ring |
HTB-025 | 100% Recycled 25lb. Snap on molded rubber base (Drum snaps over base) |
| HD-BASE | Blow Molded Snap on Base accepts sandbags as ballast |
HTB-040 | 100% Recycled 40lb. Snap over molded rubber base (Drum snaps over base) |
Highway Tech Base Specifications |
|||
| Base Material | Tire Ring |
100% Recycled Molded Rubber Base |
Blow Molded Sand-Bag Base HDPE |
| Base Weight | 25 LB. |
25 or 40 lbs. | 3.0 lbs. |
| Base Height | 2.5” |
3.5” | 2.25” |
| Base Diameter | 36” OD – 22.5” ID |
25” | 23.5” |
Base Length |
NA |
27.1” | 33” |
| Color | Black | Black | Traffic Barrel Orange |
HIGHWAY TECH SAFETY PRODUCTS
EASTERN MOLDING INTERNATIONAL, EMI
Elizabeth Street, Batavia,
NY 14020
Phone 585.344.0220
Fax 585.344.2513
Toll Free:1.800.483.7875
Copyright © 2007 Eastern Molding International
all rights reserved